Operating instructions

ManualsBrandsVerilux ManualsLightingHeritage

Job#: 0.0 Title: VF03 Heritage Floor Manual Update

Date: 10/09/13 Version: VF03-MAN-Rev11

Model: VF03

VF03-MAN-Rev11.indd 1 10/9/13 2:51 PM

Summary of content (12 pages)

PAGE 1
Model: VF03 VF03-MAN-Rev11.indd 1 10/9/13 2:51 PM Job#: 0.
PAGE 2
Dear Customer, Thank you for purchasing the Verilux Heritage™ Deluxe Natural Spectrum® Floor Lamp. You now own an innovative product, manufactured to the highest standards and backed by a one-year limited warranty. As a Verilux customer, your satisfaction means everything to us. We look forward to serving you now and in the future. Many other healthy lighting products are available through our catalog and online. Visit us on the web at www.verilux.
PAGE 3
READ ALL INSTRUCTIONS BEFORE USING Important Safeguards DANGER: • To avoid electrocution, do not operate this lamp near water. WARNING: • Do not use with power supply voltage other than 120 VAC. • Do not defeat the the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other. The wider blade is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
PAGE 4
CAUTION: — continued • Use only the type of bulb and maximum wattage indicated by Verilux. • Protect the power cord from being walked on or pinched, particularly at the plugs, convenience receptacles and the point where the power cord exits the lamp. • Avoid placing the lamp in areas that are dusty, humid/moist,lack ventilation, or are subject to constant vibration. • Avoid placing this lamp in areas that are exposed to direct sunlight or close to heat radiating products such as heaters.
PAGE 5
Assembly Instructions Please Read Operating Instructions Carefully Before Using the Heritage™ Deluxe Natural Spectrum® Floor Lamp: 1. Set lamp base on the floor and insert the lower lamp shaft (G) onto the base and screw clockwise to tighten (Fig.1). 2. Pull the slack of the electrical cord through the lamp base (I). 3. Loosen the height adjusting collar (E) to free lamp arm (D). D E 4. With one hand holding the lamp arm (D), screw the upper shaft (F) onto the lower shaft (G). (See assembly detail below.
PAGE 6
Assembly Instructions — continued 7. Attaching the Optix® glare control filter: • Remove glare control filter from protective plastic bag. Take care to hold filter by the edges only. • Insert tabs on bottom of filter into opening (Fig. 2). • Press into place using thumb tab. Do not touch or press on the filter material itself. Note: Do not touch filter material Fig. 2 8. Attach the ballast to the power cord. Use care to align the 4-pin plug properly. DO NOT FORCE.
PAGE 7
Adjusting the Heritage™ Floor Lamp The Heritage Floor Lamp adjusts several ways: D 1. To adjust lamp height – hold upper shaft (F) with one hand, loosen height adjusting collar. Raise or lower lamp arm (D) to desired height. Tighten collar (Fig. 5). Note: Do not stand on cord or otherwise restrict its movement while raising or lowering the height of the lamp. 2. To rotate the lamp head right or left, loosen height adjusting collar, swing lamp arm to desired position. Tighten collar.
PAGE 8
Bulb Replacement Instructions Removal C D 1. Unplug lamp from power source. 2. To access the bulb, remove Optix® glare control filter by depressing the thumb tab and lifting it out. 3. Firmly hold bulb base (B) and pull bulb (C) from the socket (A) in an outward motion (Fig. 9). B Installation 1. Unplug lamp from power source. A 2. Firmly hold base (B) and push bulb (C) into the socket (A). Fig. 9 3.
PAGE 9
Natural Spectrum and Productivity When it comes to maximizing work, study or task time, a Verilux lamp is the perfect partner. It uses Natural Spectrum Light that replicates key beneficial wavelengths of natural daylight to help you read faster with greater comprehension, work longer without eyestrain and improve productivity and focus.
PAGE 10
Troubleshooting Before requesting service on your Verilux® lamp, please: • Make sure all power connectors, cords and plugs are inserted fully and securely. • Be sure the bulb is securely seated into the socket. (See page 8.) • Make sure there is power to the wall outlet or try another outlet. PROBLEM Light Won’t Come On CHECK Has the plug come loose? Is the bulb old? SOLUTION Insert plug securely into wall outlet.
PAGE 11
One-Year Limited Warranty ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT! Many questions may be answered by visiting www.verilux.com, or you may call our Customer Service Department at 1-800-786-6850 during normal business hours. This limited warranty is provided by: Verilux, Inc.