manual

9
Bulb Replacement
Fig. 7
Correctly Seated Bulb Incorrectly Seated Bulb
No Gap
Notice
Large
Gap
Fig. 8
B
D
C
A
Fig. 9
Removal
1. Unplugthelampfromthepowersource
and allow bulb to cool.
2. To access the bulb, remove light diffuser
by depressing the tab and lifting it out
(Fig. 7).
3. Firmlyholdthebulbbase(B)andpull
bulb (C) from the socket (A) in an outward
motion (Fig. 8).
Installation
1. Unplugthelampfromthepowersource.
2. Firmlyholdthebase(B)andpushbulb(C)
into the socket (A).
3. Besurethebulbisrmlyseatedinthe
socket (Fig. 9) and snapped into the
metal bulb clip (D).
4. Replacethelightdiffuser.
Attention: Do not grip the bulb by the
glass tubes. Only touch the base when
removing or inserting the bulb.
VF02_MAN_Rev14.indd 9 12/29/11 4:25 PM