SLEEP WAKE OFF SET Natural Alarm Clock & Sleep System SOUND Serenity™ Series Model: VA06
Dear Customer, Thank you for purchasing the Verilux® Rise & Shine® Serenity™ Natural Alarm Clock & Sleep System. You now own an innovative product, manufactured to the highest standards and backed by a one-year limited warranty. Many other healthy-lighting products are available through our catalog and online. To request a free copy of our catalog, call us toll-free at 1-800-786-6850. You may also visit us online at www.verilux.com to learn more about all our quality Verilux products.
Table of Contents Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5 FCC Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Set-up Instructions Unpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
READ ALL INSTRUCTIONS BEFORE USING Important Safeguards DANGER: • To avoid electrocution, do not use this device near water. WARNING: • Do not dismantle. • Do not use with power supply voltage other than 120 VAC. • Do not operate in close proximity to flammable or combustible vapors, such as aerosol spray products, or where oxygen is being administered. • To avoid overheating the electronics or increasing the risk of fire, never cover the product. • Do not block any ventilation openings.
CAUTION: — continued • Do not use solvents or cleaners containing abrasives or ammonia-based cleaners on this product. After cleaning, all moisture should be properly wiped away and dried before restoring power. • Avoid placing this product in areas that are dusty, humid/moist, lack ventilation or are subject to constant vibration. • After cleaning, properly wipe and dry the lamp prior to restoring power.
Features The Rise & Shine Serenity helps align the body’s circadian rhythms that regulate normal sleeping and waking patterns. Synchronized sleep and wake programs provide the body with cues to fall asleep naturally, sleep soundly and wake refreshed and revitalized. The harmonious blend of light and sound therapy naturally directs the body to energized waking and healthy sleep patterns.
Display and Controls 8 9 1 1 SLEEP WAKE 2 OFF SOUND SET 3 4 5 6 10 7 Front of Unit Button Standard Clock Mode: Programming Mode: 1 After pressing one of the function buttons (2 through 7), use to adjust your various audio and light settings Use to customize many of the settings you'll make, including time of day, light illumination level, and sound level 2 1) press to set the display LED illumination level, 2) Press and hold to turn on the light to its previous or to change the light lev
Display and Controls — continued Button 6 7 OFF Standard Clock Mode: Programming Mode: Press to turn off a sound source or the light Press to complete any programming step SET Press to turn on the radio station or soundscape you or to change your have selected. Use with to adjust the volume. May also selection. Press be used to turn it off. SOUND 8 LIGHT 9 SNOOZE Tap to turn on the light. No function Tap to turn on the light, or, when the alarm sounds, to activate the Snooze function.
Display and Controls — continued Verilux Patent: 6,236,622 F E D Back of Unit D Back-up battery compartment: To keep the Rise & Shine working during a power outage, open the compartment and insert three AAA batteries (not included). Properly orient each battery to ensure correct polarity. E Power source: Insert power cord jack into the “DC5V” receptacle. Plug the other end into a standard outlet. F Reset: To reset the Rise & Shine to its original settings, insert an object (e,g.
Programming the Rise & Shine NOTE: If you make an error at any time, press OFF/SET to re-start the step you had been programming. General Set-up Or, wait about eight seconds, and, once the unit returns to the time display mode, you may begin the step again. To Set: Action: Display: Action: To Finish: Notes Time Press and hold OFF/ SET Flashing 12:00 (or the last time you have set) or to desired time (Hold button to accelerate display.
Programming the Rise & Shine — continued Waking Awaken to the nature sound, radio station and/or light intensity you have programmed. Programming To Set: Action: Display: Action: Alarm Time Press and Hold WAKE Flashing 12:00 (or the last time you have set) and or to desired wake time (Hold button to accelerate display.) Light Duration and Type Press and hold WAKE. Press WAKE again. Notes This step does not activate the alarm; it only sets the alarm time.
The sunset simulator/sleep timer allows you to fall asleep to the nature sound, radio station and/or light intensity you have programmed. Programming — continued Sleeping Waking — continued Programming the Rise & Shine — continued To Set: Action: Turning the Alarm Program On & Off In the normal time mode, press WAKE to turn off the alarm program and WAKE again to turn it back on.
Other Functions/Features Using as Sound Source (Radio) Using as Sound Source (Soundscapes) To Set: Action: Display: Action: To Finish: Notes Turn On Press SOUND The code for the sound you previously programmed appears in the display. [See Key#2, page 10 or 13.].) or Press to scroll through sounds. (See Key #2, page 10 or 13.) Press OFF/ SET. Your setting will be stored.
Using the Snooze Feature Sound Light Timing Responses Responses immediately stays off goes off five minutes later stays off starts at a low level and begins a 15-minute cycle during which it builds in intensity until it reaches the maximum brightness you have programmed five minutes before the programmed wake-up time starts at low volume and builds progressively to the wake-up level you have programmed continues 15-minute cycle at wake-up time at full volume you have programmed.
Troubleshooting — continued Problem Solution Lamp does not light during wake and sleep modes. For proper alarm lamp operation: 1) c omplete setting and activating the alarm at least 30 minutes before you want it to sound. 2) m ake sure the power cord is plugged in. The lamp will not function when the unit is on battery power. No light. In the standard time mode, tap the top of the unit. In the programming mode, recheck programming instructions.
One-Year Limited Warranty ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT! Many questions may be answered by visiting www.verilux.com, or you may call our Customer Service Department at 800-786-6850 during normal business hours. This limited warranty is provided by: Verilux, Inc.
