Technical data

Verifone Finland Oy
31 Vantaankoskentie 14 FI-01670 VANTAA | tel: [phone] | fax: [phone]
www.verifone.fi
Choose daily report.
The terminal prints out a report that lists the sold products, the amount of products, the total
amount of sold products and the different VAT groups of the sales.
Resetting the report:
The terminal gathers transactions to the report until it is been reset. The report can be reset at any
time.
Press Reports, enter and choose Product report.
Choose daily report and select reset report.
Choose yes.
The terminal prints out the product report and resets it.
6. TROUBLE SHOOTING
6.1 Notifications on the screen
BLACKLIST MISSING = The blacklist is missing from the terminal. See instructions for
downloading the blacklist (4.3.4).
USE MAG CARD = The terminal cannot read the card’s chip. Use the magnetic strip reader.
USE CHIP = The card has an EMV-chip. Use the chip reader.
PIN LOCKED = The pin code of the card in use has been locked. It can be unlocked
by contacting the card donor or by using the card on an atm.
APPLICATION LOCKED = The application on the card is locked. The card holder has
to contact the card donor.
JÄSENLIIKENUMERO PUUTTUU = The card is not included in the terminals card
selection. It cannot be used . The terminal also might not have the AID and BIN-tables. Send the
batch from the terminal (instructions 4.3.3).
SERVICE NOT ALLOWED FOR THIS CARD PRODUCT = The card in use is not included
in the terminals card selection. It cannot be used.
NOT ALLOWED = The card in use does not permit to make the wanted transaction. For example
manual entry with a Visa Electron is not allowed.
WRONG CARD = Check that the card in use is the correct card for the required transaction.
TRANS NOT FOUND = The transaction is not in the terminals memory, check the receipt number.