Technical data
Verifone Finland
Oy
16
Vantaankoskentie 14 FI-01670 VANTAA | tel: +358 (0)9 477 4330 | fax: +358 (0)9 436 2490
www.verifone.fi
The terminal prints out the merchant’s receipt and asks to print the customer’s receipt. Press Enter
if you wish to print out the customer’s receipt. Otherwise, press Cancel.
4.1.6 Manual entry
Select the Menu icon from the screen and choose MANUAL ENTRY
CARD NUMBER: Type the card number and press Enter
EXPIRY DATE: Type the card’s expiry date and press Enter
CREDIT / DEBIT: Choose the payment method.
ENTER AMOUNT: Type the complete amount and press Enter .
DIAL YES / NO: If you want the terminal to make an automatic authentication for the transaction
choose YES
NOTE! Manually entered transactions must be authenticated
If you pass the authentication by choosing NO, the terminal will ask for authentication code. Call to
the authorization centre and ask for an authentication code. Type in the code given to you and
press Enter. You can pass this by typing 9999. In this case the responsibility of the transaction is
on the company.
The terminal prints out the merchant’s receipt and asks to print the customer’s receipt. Press Enter
if you wish to print out the customer’s receipt. Otherwise, press Cancel.
The terminal will remind you to check the customer’s ID, if the transaction exceeds 50,00€
(depending on the card used). Press Enter, check the ID and write the last 4 digits of the social
security number and which ID was checked to the receipt.
NOT ALLOWED: The transaction is not allowed with the card type
4.1.7 Receipt copy
Select the Menu icon and choose PRINT COPY.
RECEIPT NUMBER: The terminal suggests the number of the last transaction. Accept by pressing
Enter. Otherwise, type the wanted receipt number and press Enter.
The terminal prints out a copy.
4.1.8 Refund
You can make a refund at any time. If you need to undo a transaction at the same day use the
REVERSAL instead
NOTE! It is not allowed to make a return for a bank card.
Select the Menu icon and choose RETURN
ENTER AMOUNT: Type the complete amount and press Enter
INSERT/SWIPE OR TAP CARD: Insert the card into the chip reader, swipe the card or place the
card on top of the display