Technical data
Verifone Finland
Oy
11
Vantaankoskentie 14 FI-01670 VANTAA | tel: +358 (0)9 477 4330 | fax: +358 (0)9 436 2490
www.verifone.fi
1.10 Testing the connection
From the main display, select the Reports icon. After this, press enter and select SEND BATCH.
The screen informs DIALING. If the terminal successfully connects, the text CONNECTED appears
on screen. A white bar and the text RECEIVING are displayed on screen. The bar turns gradually
black as the batch sending progresses.
The terminal downloads the blacklist and other required
card information files from the bank.
After this the terminal is ready for use.
If the blacklist is not downloaded to the terminals memory, you can test the connection by
switching on the terminal.
The screen informs BLACKLIST MISSING UPDATE THE BLACKLIST? Press Enter, and the
terminal connects to the bank and downloads the blacklist and other required card information files.
If the connection is not working, see section 6 TROUBLESHOOTING for further information.
2. SETTINGS
2.1 Terminal settings
To get to the terminals setting menu, select the Settings icon from the screen and press Enter.
Some of the listed settings are explained in later sections. The sections are marked in brackets.
From the Settings menu choose EDIT.
BATCH TIME (2.3) Batch sending time
CASHIER NUMBER (2.4) Terminal’s cashier number
TCP/IP PARAMETERS (2.6) DHCP / FIXED IP
LANGUAGE Terminal’s language (FIN/SWE/ENG)
EXTRA AMOUNT (5.2) Extra amount settings
CASH RECEIPT (5.1) YES / NO
POWER OPTIONS (2.7) Terminal’s power settings
AUTH. MANDATORY (5.4) YES/ NO
TIME SETTINGS (2.5) Time and date settings
VAT (5.3) YES / NO
PREAUTHORIZATION (5.6) YES / NO
SOUND (2.9) ON / OFF
CONTRAST (2.8) Settings for the screen’s brightness
AUDIT LOG IP (2.10)
2.2 Parameter printing
Select the Settings menu and press Enter.
Choose PRINT and PAREMETERS.
The terminal prints out the parameters list, which shows the technical settings of the terminal. This
list is good to save.