Instruction manual

GETTING STARTED
LinkPoint International, Inc.



1999 3 LFRST23 Reference Manual
Installation
Installing the LinkPoint 3000 terminal is simple and requires no tools.
1. Connect the AC adapter’s triangular end to the power input at the rear of the LinkPoint 3000
terminal (Figure 3).
Figure 3
2. Plug the adapter into a 120V electrical outlet (Figure 4) or into a quality surge suppressor.
Figure 4
3. Insert one end of the telephone line cord into one of the modular jacks at the rear of the
terminal. Insert the other end of the line cord into a modular telephone wall jack, just as one
would connect a telephone (See Figure 5). The modular plug may be inserted directly into the
wall jack, or use a 4-prong adapter (not included) for older 4-prong jacks.
Note:
A standard telephone may be connected to the other modular jack at the rear of the
terminal.
Figure 5
4. If the PrintPoint 1000, PrintPoint 3000, VeriFone P250, P900, PrintPak350, Citizen iDP3530
iDP562 or other compatible printer is used with the LinkPoint 3000 terminal, please refer to
the manual packaged with the printer for installation and operating instructions.