Instruction manual

STANDARD KEY OPERATIONS



1999 LinkPoint International, Inc. 56 LFRST23 Reference Manual
The Adding Tips function is used to enter and correct tip amounts as necessary for successful
batch closure. Follow the steps below to enter and adjust tips, prior to batch closure.
Display Message Operator Action
READY XXX Press the [+] key.
JAN-03-00_MON_12:00P
[
▲
] [
▲
] [
▲
]
ENTER PASSWORD - If prompted, key in the password (the default is 123123)
_ and press [ENTER].
[
▲
] [
▲
] [
▲
]
(optional)
ADJUST: TIP? TAB? Press the center [
▲
] key to select TIP?
| |
[
▲
] [
▲
] [
▲
]
ENTER SERVER ID Key in the individual’s Server ID (or Item Number if
_ Server ID not used) printed on the receipt and press
[
▲
] [
▲
] [
▲
][ENTER].
(optional)
(This prompt is optional.)
001 DINE $ 0.00 Press the right [
▲
] key to select ADD TIP? to enter or edit
OK? ADD TIP? the tip OR press the left [
▲
] key to select OK to accept the
[
▲
] [
▲
] [
▲
] amount displayed.
001: ENTER TIP AMT Enter the tip amount and press [ENTER].
$0.00
[
▲
] [
▲
] [
▲
]
001 DINE $ 0.00 Press the left [
▲
] key to select OK? if the total including
OK? NEW TIP? tip is correct OR press the right [
▲
] key select NEW TIP?
[
▲
] [
▲
] [
▲
] to change or correct the tip amount.
002 DINE $ 0.00 Next item for that server is displayed. Repeat the
OK? ADD TIP? above procedures to finalize the remaining transactions
[
▲
] [
▲
] [
▲
]for that server.
END OF SERVER 00 END OF SERVER will display briefly, followed by the
option to print a report.
[
▲
] [
▲
] [
▲
]
PRINT SVR 00 RPT? This print option only prompts when the Server ID
YES NO function is enabled and only when a printer is used.
[
▲
] [
▲
] [
▲
]
Display Message Operator Action