Instruction manual

DOWNLOAD PARAMETERS
LinkPoint International, Inc.
1999 33 LFRST23 Reference Manual
DOWNLOAD PARAMETERS
Download parameters are used for programming or updating a terminal’s profile. These
parameters may be added or modified through the standard Zontalk Edit Procedures. As
mentioned in the previous section, downloads may be performed by three methods: modem-to-
terminal in the field, computer-to-terminal, or terminal-to-terminal via the RS232 serial port. The
following list contains the available parameters for the LFRST23 Restaurant application. The list is
organized into four columns containing the memory location, the type of field, maximum field
length, and the description of the field’s contents.
Field Type Codes
N = numeric
Q = question, Y or N
P = phone number field
X = Alphanumeric
B = Binary (0 or 1)
Memory Locations
Parameter Field Type Field Length Description of Field
#ARPT Q 1 Auto report at Batch Close: Y or N
#BMAX N 3 Max. # items in batch
#BTAB Q 1 Enable bar tab: Y or N
#CBMAX X 6 Maximum amount for Debit cash back
#CBMIN X 6 Minimum amount for Debit cash back
#CKMID X 11 Check Guarantee Merchant ID
#CKPNP P 20 Check Guarantee Primary phone number
#CKPNS P 20 Check Guarantee Secondary phone number
#CKSVC N 1 Check Service (0=CSI, 1=Equifax, 2=Telecheck)
#CLOCK Q 1 12 hour format flag: Y or N
#CSWD X 8 Card swipe default: SALE, AUTH or TICKET
#DATIP N 3 Default tip percentage add-on to authorization
#DAUTH X 6 Default authorization amount for bar tabs
#DBTIP B 1 Tip Entry on Debit Card (0=PIN Device, =Terminal)
#DCBSC X 4 Surcharge—Debit cash back (e.g., 50 = .50¢)
#DEBCB Q 1 Ask for cash back for Debit: Y or N
#DEVID X 4 Device ID
#DPOSC X 4 Surcharge—Debit purchase only (e.g., 50 = .50¢)
#DRCRE Q 1 Disable Credit RETURNS: Y or N
#DRDEB Q 1 Disable Debit RETURNS: Y or N
#DWKEY X 16 Debit working key
#FLEX1 X 40 Receipt flex prompt line 1 (below signature line)
#FLEX2 X 40 Receipt flex prompt line 2 (below signature line)
#FLEX3 X 40 Receipt flex prompt line 3 (below signature line)
#H1 X 40 Header line 1
#H2 X 40 Header line 2
#H3 X 40 Header line 3