Instruction manual

DOWNLOAD PROCEDURES
LinkPoint International, Inc.



1999 31 LFRST23 Reference Manual
Enter Appl. ID. Press [ENTER] to accept the current application ID or type in
LFRST23 the new application ID and press [ENTER].
[
▲
] [
▲
] [
▲
]
Enter Terminal ID. Press [ENTER] to accept the current terminal ID or type in
the new terminal ID and press [ENTER].
[
▲
] [
▲
] [
▲
]
Direct Download Select the type of download. Press the left [
▲
] key for a “Full”
Full Partial download or press the right [
▲
] key for a “Partial” download.
[
▲
] [
▲
] [
▲
]
WAITING ON ENQ... Please wait...
[
▲
] [
▲
] [
▲
]
* - - - - - - - - - - Please wait...
AP-L3FRET1 T-SAMPLE
[
▲
] [
▲
] [
▲
]
__CLEAR_to_resume Press [CLEAR] to allow the program to finish loading.
_ Time__Load__Setup
[
▲
] [
▲
] [
▲
]
POS-to-POS (Master/Slave) Download
The POS-to-POS download transfers all application and transaction data from the master
terminal to the slave terminal. Therefore, it is important to ensure the integrity of the master
device. This includes ensuring that: (a) there are no transactions in the master, (b) all parameters
are set to the default settings, (c) the date/time and hardware settings are correct. To perform a
POS-to-POS download connect one end of a standard VeriFone 8-pin DIN back-to-back
download cable (p/n 00490-00 REV C) to the master terminal’s RS232 port and the opposite end
to the RS232 port of the slave terminal. The master terminal must be fitted with an EPROM (OS)
version of 1.4 or higher to perform this type of download. Follow the steps below to setup the
master and slave terminals for a POS-to-POS download.
Master Display Master
Action
Slave Display Slave Action
_____READY XXX Press [*] [6]. _____App. not available Press [#] [6].
JAN-03-00_MON_12:00P Time Load Setup
[
▲
] [
▲
] [
▲
] [
▲
] [
▲
] [
▲
]
Master Display Master Slave Display Slave Action