Instruction manual

DOWNLOAD PROCEDURES



1999 LinkPoint International, Inc. 28 LFRST23 Reference Manual
FUNCTION Press [BACKSPACE].
__
[
▲
] [
▲
] [
▲
]
Enter password: If prompted, key in the password and press [ENTER]. The
password may be obtained through the bank/ISO or FDMS
[
▲
] [
▲
] [
▲
]Help Desk.
(optional)
Enter Appl. ID. Press [ENTER] to accept the current application ID or type in
LFRST23 the new application ID and press [ENTER].
[
▲
] [
▲
] [
▲
]
Enter Terminal ID. Press [ENTER] to accept the current terminal ID or type in
the new terminal ID and press [ENTER].
[
▲
] [
▲
] [
▲
]
Modem Download Select the type of download. Press the left [
▲
] key for a “Full”
Full Partial download or press the right [
▲
] key for a “Partial” download.
[
▲
] [
▲
] [
▲
]
DIALING... Please wait...
[
▲
] [
▲
] [
▲
]
CONNECTED 1200 Please wait...
AP-LFRST23 T-SAMPLE
[
▲
] [
▲
] [
▲
]
* - - - - - - - - - - Please wait, the download will last approximately 12-14
AP-LFRST23 T-SAMPLE minutes. After it is completed, the terminal will configure the
[
▲
] [
▲
] [
▲
] application.
_____READY XXX The terminal is ready for operation when it displays READY
JAN-03-00_MON_12:00P XXX and the date and time.
[
▲
] [
▲
] [
▲
]
Direct PC-to-POS Download
The direct PC-to-POS download requires the use of a local PC with the software necessary to
perform a local download (i.e., Zontalk 2000

). Follow the procedures outlined below to setup
the LinkPoint 3000 terminal for a local download. A serial cable with a DB-9 female to the PC
male connector and 8-pin DIN male connector to the terminal’s RS-232C port, such as VeriFone
cable part #00446-04 REV. E, is required.