Instruction manual

DOWNLOAD PROCEDURES



1999 LinkPoint International, Inc. 26 LFRST23 Reference Manual
DOWNLOAD PROCEDURES
There are three methods of downloading the application into the LinkPoint 3000: 1) remotely via
telephone, 2) PC-to-POS, and 3) POS-to-POS. Unless an application has been pre-downloaded,
the terminal will initially display the message APP. NOT AVAILABLE. If a full or a partial
download is selected, the terminal will prompt the user to enter any missing fields (i.e.,
application ID) and will automatically return to the first empty field.
Telephone Download (No application loaded)
The telephone download requires the use of a remote PC with the software necessary to accept
incoming download requests (i.e., Zontalk 2000

). Follow the procedures outlined below to setup
the LinkPoint 3000 terminal for a modem download.
When the terminal displays ‘APP. NOT
AVAILABLE’ on line 1 of the display, a FULL download must be initiated.
__App. not available Press the middle [
▲
] key to select LOAD.
_ Time__Load__Setup
[
▲
] [
▲
] [
▲
]
Enter password: If prompted, key in the password and press [ENTER]. The
password may be obtained through the bank/ISO or FDMS
[
▲
] [
▲
] [
▲
]Help Desk.
(optional)
Press the right [
▲
] key to select SET PORT.
Download Set_port
[
▲
] [
▲
] [
▲
]
Select download port Press the left [
▲
] key to select MODEM.
Modem RS232
[
▲
] [
▲
] [
▲
]
Modem settings Press right [
▲
] to select Dial Mode.
Baud/par Dial Mode
[
▲
] [
▲
] [
▲
]
Select dial mode Select the phone line type. Press the left [
▲
] key to select
Tone Pulse TONE (standard) or press the right [
▲
] key to select PULSE.
[
▲
] [
▲
] [
▲
]
Tone dial selected A “...dial selected” message will display momentarily. Press
Tone Pulse [CLEAR] twice to return to DOWNLOAD SET PORT prompt.
[
▲
] [
▲
] [
▲
]
Press the left [
▲
] key to select DOWNLOAD.
Download Set_port
[
▲
] [
▲
] [
▲
]
Enter phone number Press [ENTER] to accept the current telephone number or key in