Instruction manual

TERMINAL DIAGNOSTICS
LinkPoint International, Inc.



1999 19 LFRST23 Reference Manual
TERMINAL DIAGNOSTICS
The LinkPoint 3000 diagnostics option tests the different hardware components of the terminal.
Follow the procedures outlined below to initiate the diagnostics menu. Diagnostics are intended
for use primarily by repair depots, technicians, and for POS support service centers.
Display Message Operator Action
_____READY XXX Hold down the [ALPHA] key and press [7] [1] [3] [9]. Release
JAN-03-00_MON_12:00P the [ALPHA] key to enter the boot mode.
[
▲
] [
▲
] [
▲
]
__CLEAR_to_resume Press the right [
▲
] key to select SETUP.
_ Time__Load__Setup
[
▲
] [
▲
] [
▲
]
Setup Press the right [
▲
] key to select TEST.
Ports Model Test
[
▲
] [
▲
] [
▲
]
Test Press the right [
▲
] key to select DIAGS.
Mem Clear Diags
[
▲
] [
▲
] [
▲
]
Enter password: Key in the default password of [4] [6] [5] [1] [0] [7] [0] or the
password assigned by the bank/ISO or FDMS Help Desk and
[
▲
] [
▲
] [
▲
] press [ENTER].
LP-3000,3.0,01/29/99 At this point, the LinkPoint 3000 terminal prompts the user
Select Test Number to choose from the ten tests it can perform. To select a test
[
▲
] [
▲
] [
▲
] simply press the appropriate number key.
Display Test —Press [1]
Display Message Operator Action
Display Test Please wait...
[
▲
] [
▲
] [
▲
]
0123456789ABCDEFGHIJ
Please wait...
KLMNOPQRSTUVWXYZ{\}^
[
▲
] [
▲
] [
▲
]
###################
##################
At this point this you can press [ENTER] to continue the
diagnostics testing or press [CLEAR] to exit the testing.
[
▲
] [
▲
] [
▲
]