Instruction manual

BOOT MODE FUNCTIONS



1999 LinkPoint International, Inc. 18 LFRST23 Reference Manual
Clear Memory
This irreversible function erases the terminal’s memory (RAM) and should only be accessed with
the assistance of a qualified service representative. Follow the procedures outlined below to erase
the terminal’s RAM.
WARNING:
After erasing the RAM, a full download must be performed to restore the
application to the terminal’s memory.
Display Message Operator Action
READY XXX Hold down the [ALPHA] key and press [7] [1] [3] [9]. Release
JAN-06-97 MON 12:00P the [ALPHA] key to enter the boot mode.
[
▲
] [
▲
] [
▲
]
__CLEAR_to_resume Press the right [
▲
] key to select SETUP.
_ Time__Load__Setup
[
▲
] [
▲
] [
▲
]
Setup Press the right [
▲
] key to select TEST.
Ports Model Test
[
▲
] [
▲
] [
▲
]
Test Press the left [
▲
] key to select MEM CLEAR.
Mem Clear Diags
[
▲
] [
▲
] [
▲
]
Enter password: Key in the default password of [4] [6] [5] [1] [0] [7] [0] or the
password assigned by the bank/ISO or FDMS Help Desk and
[
▲
] [
▲
] [
▲
] press [ENTER].
Clear: Are you sure? Press the left [
▲
] key to select YES and confirm memory
Yes No clear.
[
▲
] [
▲
] [
▲
]
__App. not available The memory was successfully cleared.
Time Load Setup
[
▲
] [
▲
] [
▲
]