Instruction manual

BOOT MODE FUNCTIONS



1999 LinkPoint International, Inc. 16 LFRST23 Reference Manual
PINpad Port Setup
To change the PINpad port factory defaults follow the steps outlined below. The standard default
settings are: Baud= 1200, Parity= Even.
Display Message Operator Action
READY XXX Hold down the [ALPHA] key and press [7] [1] [3] [9]. Release
JAN-03-00 MON 12:00P the [ALPHA] key to enter the boot mode.
[
▲
] [
▲
] [
▲
]
CLEAR_to_resume Press the right [
▲
] key to select SETUP.
_ Time Load Setup
[
▲
] [
▲
] [
▲
]
Setup Press the left [
▲
] key to select PORTS.
Ports Model Test
[
▲
] [
▲
] [
▲
]
Port setup Press the right [
▲
] key to select PINPAD.
Printer RS232 Pinpad
[
▲
] [
▲
] [
▲
]
Pinpad_setup Press the left [
▲
] key to select BAUD.
Baud Parity
[
▲
] [
▲
] [
▲
]
Current baud: 1200 Select the correct baud rate (default is 1200). Press the [
▲
]
1200 2400 key below your choice to select it and press [CLEAR].
[
▲
] [
▲
] [
▲
]
Pinpad setup Press the right [
▲
] key to select PARITY.
Baud Parity
[
▲
] [
▲
] [
▲
]
Current parity: Even Select the correct parity (default is Even). Press the [
▲
] key
Even None Odd below your choice to select it and press [CLEAR] five times
[
▲
] [
▲
] [
▲
] to reboot the terminal.