Instruction manual

BOOT MODE FUNCTIONS



1999 LinkPoint International, Inc. 14 LFRST23 Reference Manual
Printer Port Setup
To change the printer port factory defaults follow the steps outlined below. The default settings
are compatible for use with most LinkPoint, VeriFone, and Citizen printers.
There is usually no
need to change these settings
. Standard Default: Baud= 9600, Parity= Even.
Display Message Operator Action
READY XXX Hold down the [ALPHA] key and press [7] [1] [3] [9]. Release
JAN-03-00 MON 12:00P the [ALPHA] key to enter the boot mode.
[
▲
] [
▲
] [
▲
]
CLEAR_to_resume Press the right [
▲
] key to select SETUP.
_ Time Load Setup
[
▲
] [
▲
] [
▲
]
Setup Press the left [
▲
] key to select PORTS.
Ports Model Test
[
▲
] [
▲
] [
▲
]
Port_setup Press the left [
▲
] key to select PRINTER.
Printer RS232 Pinpad
[
▲
] [
▲
] [
▲
]
Printer_setup Press the left [
▲
] key to select BAUD to change the
Baud Parity baud rate of the printer port.
[
▲
] [
▲
] [
▲
]
Current baud: 9600 Select the correct baud rate. Press the [
▲
] key below your
1200 2400 9600 choice to select it and press [CLEAR].
[
▲
] [
▲
] [
▲
]
Printer_setup Press the right [
▲
] key to select PARITY.
Baud Parity
[
▲
] [
▲
] [
▲
]
Current parity: Even Select the correct parity. Press the [
▲
] key below your
Even None Odd choice to select it and press [CLEAR] five times to reboot the
[
▲
] [
▲
] [
▲
]terminal.