Instruction manual

APPENDIX A—PROMPTS



1999 LinkPoint International, Inc. 100 LFRST23 Reference Manual
NO TOTALS FOUND!
No transactions were found for the card type selected.
NOT FOUND!...
The terminal displays this message when it cannot find the
information requested (i.e., there is no item number 99 in the
current batch).
OPEN TAB
This displays at batch closure when a Bar Tab requires
finalization.
PICK UP CARD
The host computer has detected that the card used is no longer
valid or it may be lost or stolen.
PREV NEXT NEW
This message displays on line 2 during a VOID request.
PRINTER DISABLED!
CHECK PRINTER!
User may not have a printer or it may not be installed properly.
Check that the printer is securely connected to the back of the
terminal, that the power is turned on, and that it is enabled via
the terminal setup.
PRINTER REQUIRED FOR
DEBIT CARD SALES
This message prompts when the [ATM/DEBIT] key is pressed
but a printer is not connected/enabled. A printer must be
connected, enabled, and powered on to perform an ATM/Debit
sale.
PROMPTS FILE
Displays during initialization of the terminal after a full or a
partial download.
READY XXX
The line 1 default idle prompt displays the number of
transactions left in the batch.
RECEIVING...
This message displays when the terminal is receiving a
response from the host computer via modem.
SERVER ID
An optional number (1-4 digits) used to define different
servers.
SWIPE ONLY
(1) User attempted to key in an ATM/Debit sale. ATM/Debit
sales must be swiped. (2) User attempted to key in a transaction
when the terminal is downloaded with the KEYED parameter
disabled.
SWIPE CARD AGAIN NOW
The card was swiped incorrectly or another card error
condition exists.
TAKE OUT
The entry method defining a purchase taken out of an
establishment.
TIP AMOUNT?
The prompt requesting the total amount of the tip.
TO SELECT PUSH ENTER
Alternate display with the PREV NEXT NEW message.