Installation Guide
Table Of Contents
- e285 Installation Guide
- Contents
- Preface
- Device Overview
- Device Setup
- Usage Guidelines
- Unpacking the Shipping Carton
- Device Features
- Removing the Battery Cover
- Installing micro SIM and/or SAM Cards
- Initial Battery Charging
- Starting Up and Shutting Down
- Using the Battery
- Connecting to a Computer
- Conducting Wireless Transactions
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Using the CTLS Reader
- Using Accessories
- Specifications
- Maintenance and Cleaning
- Verifone Service and Support
- Troubleshooting Guidelines
- Caution and Warning Messages
- Contact Verifone
DEVICE OVERVIEW
Features and Benefits
E285 INSTALLATION GUIDE 9
• EMV L1 and L2
• ISO7816-3, ISO7816-10, and EMV 4.3 standards
Connectivity
USB host/ device port
• Support UART0 software debug (TXD0, RXD0).
• USB2.0 high speed
• Support 5V/200mA for external USB peripherals
• USB host or device is configured by SW
• Type C USB connector at bottom
• Communication port for smart device on charge stand (Android, Windows, or
iDevice)
Bluetooth (wireless communication)
• Bluetooth 4.1 + EDR compliant
• Support Eddystone + iBeacon
• RF transmitter output power Class 1
• RF receiver GFSK typical -90dBm, /4 PSK typical -90dBm, 8DPSK typical -
83dBm
• UART3 interface for SOC communicates to BT
WiFi (wireless communication)
• BT, Wi-Fi, and 3G Options
• Wi-Fi dual band supports:
• 802.11 a/b/g/n/ac connectivity
• 2.4GHz and 5GHz
• Auto-band selection
3G (wireless communication)
• Gemalto EHS6
• GPRS/GSM Class 10
• UMTS/HSPA DL 7.2Mbps, UL 5.7Mbps
• Host interface USB
• Use RING0 for all wake events (new FW update from Gemalto)