Datasheet
UK T 020 7241 8787 | F 020 7241 8700 | sales@elandcables.com | www.elandcables.com
International T +44 20 7241 8740 | F +44 20 7241 8700 | international@elandcables.com
technicalspecification |
Veriflex
®
DeviceNet Thick FRNC-LSZH Cable
Find this product online: elandcables.com | Cables & Accessories
Veriflex | Veriflex DeviceNet Thick FRNC-LSZH Cable
APPLICATION
Veriflex
®
DeviceNet Thick cable for fixed and occasional flexing
indoor applications in CAN technologies. Connects industrial
devices, motor starters and PLCs. Commonly used as trunk
cables for industrial ethernet installations.
CHARACTERISTICS
Maximum Operating Voltage
300V
Temperature Rating
-30°C to +80°C
Minimum Bending Radius
15 x overall diameter
CONSTRUCTION
Conductor
Data Pair: Stranded Tinned Copper Wires - 18/19AWG
(0.25mm
2
)
Power Supply Pair: Stranded Tinned Copper Wires -
15/19AWG (0.35mm
2
)
Insulation
Data Pair: Foam-Skin Polyethylene
Power Supply Pair: Solid Polyethylene
Individual Pair Shield
AL/PET (Aluminium/Polyester Tape)
Drain Wire
Tinner Copper
Overall Shield
TCWB (Tinned Copper Wire Braid)
Separation
PET (Polyester Tape)
Sheath
FRNC-LSZH (Fire Retardant Non-Corrosive Low Smoke Zero
Halogen) compound
Core Identification
Data Pair:
White Blue
Power Supply Pair: Black Red
Sheath Colour
Violet
STA
NDARDS
BS EN 50267-2-1, BS EN 50267-2-2,
Flame Retardant according to IEC 60332-1-2
Low Smoke Density / Halogen free according to IEC 61034-2,
IEC 60754-1/2
UK LABORATORY TESTED
This product is subject to the Quality Assurance protocols of The Cable Lab
®
,
a UKAS accredited ISO 17025 cable testing laboratory. Testing includes
vertical flame, conductor resistance, tensile & elongation, and dimensional
consistency, verified to published standards and approved product drawings.
ISO
9001
Quality
Management
ISO
14001
Environmental
Management
ISO
17025
UKAS Accredited
Cable Testing
Laboratory
OHSAS
18001
Occupational
Health and Safety
Management
REGULATORY COMPLIANCE
This cable meets the requirements of the Low Voltage Directive 2014/35/EU
and the RoHS Directive 2011/65/EU. RoHS compliance has been tested and
confirmed by The Cable Lab
®
as meeting the requirements of the BSI RoHS
Trusted Kitemark
TM
.
RoHS Trusted
KITEMARK
™
KM 634267