Security Datasheet

第

页共

页

特殊灭火程序：自给式呼吸器

Unusual Fire and Explosion Hazards: Cell may vent when subjected to excessive heat-

exposing battery contents.

异常火灾或爆炸：当电芯暴露于过热的环境中时，安全阀可能会打开。

Hazardous Combustion Products: Carbon monoxide, carbon dioxide, lithium oxide fumes.

燃烧产生的危险物品：一氧化碳，二氧化碳，锂氧化物烟气

Section 6. Accidental release measures

泄露应急处理

Steps to be taken in case Material is Released or Spilled If the battery material is released, remove

personnel from area until fumes dissipate. Provide maximum ventilation to clear out hazardous

gases. Wipe it up with a cloth, and dispose of it in a plastic bag and put into a steel can. The

preferred response is to leave the area and allow the battery to cool and vapors to dissipate.

Provide maximum ventilation. Avoid skin and eye contact or inhalation of vapors. Remove spilled

liquid with absorbent and incinerate.

为防止电池材料泄露或释放采取的措施如果电池内部材料泄露，试验人员应立刻撤离试验区直到烟气

消

散。将通风设备打开吹散危险性气体。用抹布擦净试验区，清除溢出的液体，将泄露电池放进塑料袋

中，

然后放进钢制容器。避免皮肤和眼睛接触或吸入有害气体。

Waste Disposal Method: It is recommended to discharge the battery to the end, to use up the metal

lithium inside the battery, and to bury the discharged battery in soil.

废弃物处置方法：建议将电池完全放电，消耗电池内部的锂金属，并且深埋于土壤中。

Section 7. Handling and storage

操作处置和储存

The battery should not be opened, destroyed or incinerate, since they may leak or rupture and

release to the environment the ingredients that they contain in the hermetically sealed container.

Do not short circuit terminals, or over charge the battery, forced over-discharge, throw to fire. Do

not crush or puncture the battery, or immerse in liquids.

禁止打开、毁坏或焚烧电池，因为电池有可能在这些处理过程中发生爆炸、破裂或泄露等事故。禁止

将电池短路、过充、强制放电或扔入火中。禁止挤压刺穿电池或将电池浸入溶液中。