User`s guide

21-0381E v4.9.1
Welcome Report Control Admin
Sys Config Tech-Ref
283
A
rea Counter reaches Min
Considered 'empty'; User Count <= Minimum
A
rea Counter reaches Max
Considered 'full'; User Count >= Maximum
A
rea No Detected Activity
A
rea
A
ctivity Detected
A
rea 15 Min before Scheduled Arm to "On"
A
rea 15 Min before Scheduled Arm to "Stay"
A
rea 15 Min before Scheduled Disarm Arm to "Off"
A
rea Schedule in Window
A
rea
A
uto-Command Schedule In Window
A
rea Failed to Close
A
rea
A
ny point in tamper in area
A
rea
A
rmed with Bypasses in Effect
A
rea Force Armed
A
rmed with some input points 'tripped'.
A
rea User Lockout in Effect
Re: Bad Card/PIN monitoring.
A
rea Wandering Patient Detected
A
rea Version "E" Siren
A
rea Version "E" Confirmed Alarm Strobe
A
rea Version "E" Fire
A
rea Version "E" Personal Attack
A
rea Version "E" Unconfirmed Alarm
A
rea Version "E" Set/Unset
A
rea Version "E" Freezer/Fire Fault
A
rea Version "E" Bypass in Effect
A
rea Version "E" Confirmed Alarm
Confirmed alarm – European Version (Active
when more than one detector is activated
during a single armed state).
A
rea Failed to Arm
For more information see “Output to follow an
A
rea Fail to Arm” (≥V4.80)
Version "E"
: Pertains to European monitoring
requirements.
Point
(if event occurs at a specific Point):
Point Normal (OK)
Point Open (tripped or tampered--any time)
Point Open (disarmed)
Tripped or tampered when area is Off or
Stay)
Point Open (armed)
Tripped or tampered when area is ON
Point
A
larm
Tripped when area is ON
Point Bypassed
Point Preprocess Delay
PreAlarm Warning is in effect.
Point Tamper
Point Point in Delay
Point is in Delay. Follows a Custom Pt Type
that has a time delay.
Point Confirmed point command
Positive Confirmation of Point Command
A
ctivation.
Output (pertaining to another output):
Output Real Output is On
Output Equation is TRUE
Output Manual Command in Effect