User guide
Table Of Contents
- In This Issue:
- Front Panel Indicators and Controls
- DVR Front Panel Numeric/Alpha Key Controls
- IR Remote Control
- IR Remote Control Setup and Configuration
- Start Up
- Menu Descriptions
- Main Menu
- Programming Users and Passwords
- Display Menu
- Image Menu
- Recording Menu
- Manual Recording
- Playback
- SmartSearch (Motion History)
- Event Playback
- Network Menu
- Alarm Menu
- Exception Menu
- PTZ Menu
- RS232 Menu
- Preview Menu
- Transact(ion) Menu
- Utilities Menu
- DVR Rear Panel Connections
- Index
500-1421E rev1.2 NVeDVR User Guide 1
Front Panel Indicators and Controls
1 2
3 4 5 6 7
8 9
10
Index Name Description
1
Camera
Indicator
Lights
Blue = recording, Red = network transmission, Purple = recording and network
transmission.
READY Blue = DVR is ready.
IR Blue = IR remote control is programmed.
ALARM Red = alarm
MODEM Blue = modem connection and dial-up successful
HDD Flashing red = reading or writing HDD
LINK Blue = network connection is OK
Tx/Rx Flashing Blue = data is being transmitted over the network.
2
Activity
Lights
POWER Blue =Unit Power On or Red = Stand-by.
F1 LIGHT in PTZ control.
F2 AUX in PTZ control.
F3
Input switch (number, lower case, upper case and symbol). “IRIS+” in PTZ control. Preview
Mode: hide or display channel status bar.
3
F4 “IRIS –“ in PTZ control
4 PTZ Control Enter into Pan, Tilt, Zoom camera operation. “FOCUS +” in PTZ control.