User guide
Table Of Contents
- In This Issue:
- Front Panel Indicators and Controls
- DVR Front Panel Numeric/Alpha Key Controls
- IR Remote Control
- IR Remote Control Setup and Configuration
- Start Up
- Menu Descriptions
- Main Menu
- Programming Users and Passwords
- Display Menu
- Image Menu
- Recording Menu
- Manual Recording
- Playback
- SmartSearch (Motion History)
- Event Playback
- Network Menu
- Alarm Menu
- Exception Menu
- PTZ Menu
- RS232 Menu
- Preview Menu
- Transact(ion) Menu
- Utilities Menu
- DVR Rear Panel Connections
- Index
50 NVeDVR User Guide
500-1421E rev1.2
Obtain By: Network Receive
• The DVR receives data sent by the ATM machine through a network.
• This is possible when the DVR listen port is enabled.
Configure the following information:
Local Port: 10000 (default selection). Enter the applicable port value.
The software that is used in the ATM machine based on this DVR’s protocol must be used. The software will send the
transaction information directly to the DVR. The DVR will receive, analyze and overlay the text on live video.
Press Confirm to save changes or Cancel not to save the changes and return to the Main Menu.
Obtain By: String from Serial Port
ATM Type: Select the ATM machine brand from the following available:
NCR (default) OLIVETTI IBM GDYT CHENTONG TAILITE NXS
Diebold FUJITSU BULL Mini-Banl NANTIAN DRS918
WINCOR-NIXDORF HITACHI YIHUA GUANGLI XIAOXING KALATEL
SIEMENS SMI LIDE EASTCOM YUYIN NCR_2
Press Confirm to save changes or Cancel not to save the changes and return to the Main Menu.
NOTE: “Transparent Channel” must be selected in the RS-232 menu for this operation.
Software must be used in the ATM machine to send the credit card number and transaction code to the DVR through
the RS-232 port. Acquire the ATM communication specifications for transmitting data.