User guide

500-1421E rev1.2 NVeDVR User Guide iii
EN 55022 Statement:
This is a class A product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
ICES003 Statement:
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
CAUTION: Changes or modifications not expressly approved by UTC Fire & Security (UTCFS) or one of
the UTCFS member companies may void the user’s authority to operate this product.
This device is intended for use in professional security environments by trained personnel.
There are NO user serviceable parts in this device. Any service required must be undertaken by trained personnel.
If the unit arrives in an obviously damaged condition, do not attempt to power or use the unit. Contact your sales
representative to arrange a replacement.
Use the power cord supplied with the unit to connect to AC power supply. The circuit supplying the unit must have
branch protection in accordance with the appropriate governing electrical regulations. Only connect the unit to a
properly grounded receptacle. If a suitable, grounded, power supply receptacle is not available contact a qualified
electrician to have one installed.