User guide
Table Of Contents
- In This Issue:
- Front Panel Indicators and Controls
- DVR Front Panel Numeric/Alpha Key Controls
- IR Remote Control
- IR Remote Control Setup and Configuration
- Start Up
- Menu Descriptions
- Main Menu
- Programming Users and Passwords
- Display Menu
- Image Menu
- Recording Menu
- Manual Recording
- Playback
- SmartSearch (Motion History)
- Event Playback
- Network Menu
- Alarm Menu
- Exception Menu
- PTZ Menu
- RS232 Menu
- Preview Menu
- Transact(ion) Menu
- Utilities Menu
- DVR Rear Panel Connections
- Index
500-1421E rev1.2 NVeDVR User Guide 39
• 2 Minutes
• 5 Minutes
• 10 Minutes
• Manual Stop
Notes: If the Manual Stop option is selected, the alarm output will not stop until the Stop AlmOut (Stop alarm output)
button is pressed in the Utilities menu. The alarm output time includes the alarm input time and the “Output Delay
after Alarm” time.
Output Alarm Time Schedule
A schedule is defined to control when an alarm output will turn on. Select the Schedule button on the right side of the
Alarm Out Time, press “ENTER” on the DVR controls or remote control or left click a mouse to display the Schedule
menu for the associated output:
Define the Alarm Output Schedule
This schedule is set the same as the previous Schedule for recording in the Recording Menu.
4 time periods can be defined for one day and 7 days for one week.
Ensure that adequate time periods are set to avoid missing possible occurrences.
Copy to:
• Select another day of the week to copy the current day of the week selections to and press Copy.
Press Confirm to save changes or Cancel not to save changes and return to the previous menu.