User guide

36 NVeDVR User Guide
500-1421E rev1.2
Alarm Menu
Program the DVR alarm inputs.
Highlight the Alarm icon in the Main Menu and press “ENTER” at the DVR controls, remote control or left click with a
mouse to open the configuration screen.
To make selections in this screen,
1. Use the “◄”, “►”, “▲” and “▼” arrow buttons on the DVR controls or remote control or mouse pointer to high light
the screen selections.
2. Press “EDIT” to change a selection
3. Use “▲”, “▼” to change the selection. Left click the mouse to change the selection.
4. Press “ENTER” to save a selection and return to the Image Menu.
5. After making changes, press Confirm to save the changes or Cancel to not save the changes.
Select Alarm In
Select an alarm input.
Alarm Type
Normally Open (N.O.) or Normally Closed (N.C.).
Alarm Response
There are two selections for Alarm Response: Ignore or Active. If the Active option is selected, the Procedure and PTZ
Response buttons are enabled on the right side.
Alarm Procedure
Highlight the Procedure button and press “ENTER” at the DVR controls, remote control or left click with a mouse.