User guide

500-1421E rev1.2 NVeDVR User Guide 11
Remote Rights (Permissions)
Remote rights are for operating the DVR from the DVR PC software program.
PTZCtrl Remote control PTZ;
Record Remote manual start/stop recording;
SetPara Remote setup the DVR parameters;
Log Remote view the Event log on DVR;
Utilities Remote upgrade firmware, format HDD, reboot DVR and shut down DVR, etc.
Talk Client talks with DVR;
Alarm Remote control DVR alarm output;
LocalOut Remote control DVR video output;
Com CTRL DVR RS-232 transparent channel function.
User’s (PC) MAC address
This is the MAC address of the PC that will access the DVR. If the MAC address is used, only the PC with this MAC
address will be able to access the DVR.
NOTE: If the MAC Address is not known, contact your System Administrator or IT Department.
Camera Authorization
Camera channels can be selected individually for the user to do Local Play, Remote Play or Remote Watch.
Delete Users
1. In User Menu, use “▲”, “▼” to select one user, then use “►”, to navigate to the Del button.
2. Press ”ENTER”, in the pop-up confirmation dialog, press Confirm to delete the selected user.
Press Cancel or “ESC” to prevent the user from being deleted.