Water Pump User Manual

Figure 5a

C - Utilising 1 of 2 available pump case tappings to use a lifting eye bolt

D - Casing assembly being lifted to the vertical position with the eyebolts at the top end to

assist front cover removal and prevent damage to the studs

• Lift off front cover by utilizing case lifting eye and placing in threaded lifting hole (Fig.5).

• Remove the drive flange gasket

• Remove the rotor from the housing with the use of suitable lifting equipment

• Remove any remaining spares from the housing

• Using the lifting eye and suitable lifting equipment position the housing onto the edge of the

pallet, with the front facing down, as shown in Figure 6