Installation Manual

Con guring & Managing Accessories
Accessing the Sensor Setup Menu
With the thermostat and HVAC unit powered, follow the sensor con guration
instructions to correctly con gure the sensors.
➤ Remove the faceplate from the thermostat
➤ Press and hold the con g button until SENS appears on the screen.
CONFIGURATION BUTTON
28 29
Con guring & Managing Accessories
Activating a Sensor
➤ Remove the cover of the sensor(s) to be paired in the room;
➤ Insert two (2) AAA-cell battery into each sensor (not supplied);
➤ Press the button inside the sensor to make the sensor discoverable;*
➤ Press the FAN button on the thermostat to initiate the pairing procedure. This
will initiated a countdown that may take up to ten (10) seconds.
*The sensor(s) will remain discoverable for  ve (5) minutes after pressing the button
inside the device. If the pairing process has not been completed within  ve (5)
minutes of making sensor(s) discoverable, repeat this step.