Installation Instructions

16 17

Thermostat Conﬁguration

Conﬁguring the Energy Saving Settings

➤ Use the “Up” and “Down” buttons to select the Energy Saving preset:

E-0* Energy Savings Off - No Temperature Setback;

E-1 Lowest Energy Savings;

E-2 Lower Energy Savings;

E-3 Standard Energy Savings;

E-4 Higher Energy Savings;

E-5 Highest Energy Savings;

Refer to the APPENDIX 1 for Energy Saving Preset details.

E-C Indicates “Custom Energy Savings Settings” in case the active

thermostat savings settings differ from any Energy Saving preset;

For details, refer to the “Custom Energy Savings Settings” section;

➤ Press the “Power” button to save the Thermostat Conﬁguration and

start using the thermostat;

* Indicates default setting;

Testing the thermostat

Following the thermostat conﬁguration, test if the thermostat is controlling

the HVAC unit.

➤ Press the “Power” button to turn the thermostat ON;

➤ Press the “Down” button to change the temperature set point below

the current room temperature to conﬁrm that the thermostat

initiates air conditioning.

➤ Press the “Up” button to change the temperature set point above

the current room temperature to conﬁrm that the thermostat

initiates heating.

➤ Change the fan speed by touching the “Fan” button to test if the

thermostat is controlling the fan speed.

Thermostat Conﬁguration