Installation Manual

CONFIGURATION BUTTON
NOTE: You can access Thermostat
Confi guration settings at any time by
pressing the “Confi guration” button.
14 15
Thermostat Con gurationThermostat Con guration
Con guring the Thermostat
With the thermostat and HVAC unit powered, follow the con guration instructions
to correctly con gure the thermostat.
To ensure proper operation of the HVAC unit, complete the following steps.
➤ Pair the thermostat with the wireless controller
➤ Set the MESH ID;
➤ Enter the room number;
➤ Enter the equipment code;
➤ Con gure the energy saving settings;
➤ Set the thermostat clock
Accessing the Con guration Screen
➤ Ensure the thermostat is powered and faceplate removed;
➤ Press the con g button;
The thermostat con guration screens have a 30-second time-out. If no action is
taken within (30) seconds, the thermostat will exit con guration settings.
NOTE: When the thermostat is connected to a network, the equipment and
the energy saving settings con gured on the thermostat will be overidden by
settings con gured online.