User's Manual

18
Testing the thermostat
Following the thermostat configuration, test if the thermostat is controlling
the PTAC unit.
➤ Press the “Power” button to turn the thermostat ON;
➤ Press the “Down” button to change the temperature set point below
the current room temperature to confirm that the thermostat
initiates air conditioning.
➤ Press the “Up” button to change the temperature set point above
the current room temperature to confirm that the thermostat
initiates heating.
➤ Change the fan speed by touching the “Fan” button to test if the
thermostat is controlling the fan speed.
Thermostat Configuration