Store ‘n’ Play MP3 Player USER MANUAL VM-01
Table of Contents FCC notice......................................................................................................... 3 Handling precaution........................................................................................... 4 Product features................................................................................................. 6 Package contents................................................................................................
Table of Contents Play mode........................................................................................................ 23 System setting................................................................................................. 24 Sleep.......................................................................................................... 24 Sleep memory........................................................................................... 24 Scrolling speed.........................
FCC Notice FCC Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Handling Precaution Before using this device, please carefully read and understand the safety instructions listed below. 1. Read carefully all the attached user’s materials, and fully understand the operation guide and warnings of this device. 2. Check if the contents in the packaging of the device are consistent to the packing list. 3. When it is left unused for a long period of time, the battery should be removed.
Handling Precaution 6. Do not subject the device to drops or hard impacts which may lead to damage. 7. The device should be opened under no circumstances. The manufacturer takes no liability for damages resulting from unauthorized tampering.
Product Features - Supports WMA and MP3 file formats Bit rates supported 32kbps - 320kbps constant & variable Windows Media DRM 9 support Negative LCD Display with LED back light ID3 Tag: Song title and Artist Voice recorder with built in microphone 6 EQ modes: Normal, Rock, Jazz, Classic, Pop & Custom 5 Play modes: Normal, Repeat, Repeat all, Shuffle, & Repeat Shuffle Preset sleep timings Sleep memory function (restart resumes to where the device was last powered off) Built in USB plug to connect directly
Package Contents 1. Store ‘n’ Play MP3 Player VM-01 (x1) 2. Stereo Earphones 3. USB Extension Cable 4. AAA Battery 5. Carry Strap 6. Quick Start Guide 7.
12 Product diagrams and function buttons Product Diagrams and Function Buttons Earphone jack MIC jack Fast forward button Menu button Fast backward button Play/pause button A-B Repeat section Volume + Volume - Lock button USB jack Battery Housing LCD display screen description A-B Repeat section display Playing mode display EQ display Sleep preset display Volume level display Function button lock display Song name Mode display Playing status display Song playing display Play elapsed time display
Product Diagrams diagrams and Product and function Functionbuttons Buttons Operating method Battery installation 13
Product Diagrams and Function Buttons 10
Product Diagrams and Function Buttons 11
Connecting to the Computer Computer system requirement 1. Microsoft Windows 98SE/Me/2000/XP 2. CD-ROM drive 3. Pentium CPU above 233MHz 4. With RAM memory above 32MB(if the operating system is Windows XP, the RAM should be above 64MB) 5. Hard disk space should be above 20MB 6. Port should be USB1.1 or above 7.
USB Connection Display This player is a mass storage device. It does not need driver installation for PC connection. However for windows 98SE OS you need to install the driver. The driver is contained on the enclosed CD or download the driver from the following website: www.verbatim-europe.com www.verbatim.com For USB connection,the device can be plugged in the USB port of the computer, Press “Play/Pause” button to connect.
File Upload and Download After the device is connected to the computer to upload/download files, no special operation other than simple “drag-drop” is needed. 1. Double click “my computer” in Windows, you will find a new icon “removable disk”, which represents your digital audio player 2. If you want to download files to the device from computer, just drag the desired files to “removable disk”, which represents your digital audio player 3.
An Introduction to Basic Functions Power on/off Power on Press “play/pause” button to start the device Start figure The following picture (figure) has been set in the device before it left factory. Power off 1. Long press “play” button, the device will be shut down, as the progress bar displayed below. 2. When the progress bar is full, the device will be shut down automatically. 3. If releasing the “play” button before the progress bar is full, the device will resume to the former status.
An Introduction to Basic Functions Volume setting Adjust the volume by using “VOL+”and” VOL-” on the main device 1. Volume can be selected among 0-10 sections. 2. Press the button to adjust the volume section by section; long press on the button to adjust the volume continuously. Mode switch This device has two working modes: music mode and voice mode.
An Introduction to Basic Functions Mode menu setting Music (music mode), voice (voice mode) or exit (keep the mode selected before) are available.
An Introduction to Basic Functions Lock function When switching on “HOLD” lock button, all the functions cannot be operated. Switch on the device when it is shut down, “locked” will be displayed. When it is playing, there will be an icon of “locked” on the upper right of LCD.
An Introduction to Basic Functions Voice record In voice mode, you can record voice via the built-in Mic 1) Press “Rec/A-B” button to begin recording 2) Press “Rec/A-B” button again to stop recording 3) Recorded files are stored as default files VXXX.WAV, XXX, begins with 001 Play record Voice files recorded in the device can be played in voice mode. The operation is identical to playing music files in music mode.
An Introduction to Additional Functions Repeat section (A-B) When music file or voice file is being played, press REC/A-B button to set the start point (point A) for repetition, and press REC/A-B button again to set the ending point (point B). The device will begin repeat the section. Press REC/A-B button again to cancel A-B playing the current file. EQ setting EQ selection: “normal, rock, jazz, classic, pop, custom” are available.
File Management Delete 1. Press “MENU” button to enter function menu, Select “Delete” with “fast forward” button or “fast backward” button. 2. Press “MENU” button to enter delete function; 3. Search for the files by using “fast forward” or “fast backward” button, and select “yes” to delete the files; select “no” to return to the menu. 4. When the message “file deleted” is displayed on LCD, press “fast forward” button to select “exit” and return to main menu.
Firmware Upgrade Firmware upgrade file and upgrade procedures are available from the below websites: www.verbatim-europe.com www.verbatim.com You are recommended to check the availability of new firmware release versions to perform upgrades periodically to enhance the performance of the player. Notes: 1. Disconnection during firmware upgrading may cause failure to the device. 2. Do not change the file name or extensions of the uploaded files.
Play Mode Normal: play all the music files one by one and stop Repeat one: play the current music file, and repeat playing it Repeat all: play all music files one by one, and repeat them all Random: Randomly play all the music files once and stop Repeat Random: Randomly play all the music files ,and repeat again Exit: keep the play mode selected originally.
System Setting System setting selection menu In the modes of music or voice, the following system settings are included. Sleep To preset auto sleep time. The device will shut down automatically and accordingly after the selected minutes. “Off, 15, 30, 45, 60” minutes are available. You can also select “exit” to keep the original settings.
System Setting Resume If the sleep memory is set to “YES” , the status information will be recorded when the player is shut down. When it starts again, the player resumes to the status last time it was shut down;If the sleep memory is set to “NO” , the status will not be recorded when the player is shut down, when it starts again, the player will get into default status. You can also select “exit” to keep the original settings.
System Setting Contrast To set the contrast of LCD, totally 10 grades: “1,2,3,4,5,6,7,8,9,10” are available. You can also select “exit” to keep the original settings. Backlight time To set the time of LCD backlight for each operation, “off, 10 seconds, 30 seconds, 60 seconds, permanent” are available. You can also select “exit” to keep the original settings.
System Setting User Interface Languages: English, France, Spanish, Portuguese, German, Italy are available.
System Setting Restore default setting If selecting “yes”, the MP3 player will resume the default setting. If selecting “no”, or “exit”, the player keeps the current setting. Version It is used to display the version of the firmware of the device. IDLE time To set the stand-by time. When the MP3 player in stand-by status reaches the preset stand-by time, the MP3 player automatically shut down to save energy. There are “off, 3, 5” minutes of stand-by time available.
Appendix 29 A list of menus Normal Repeat one Repeat all Play mode Random Repeat randon Normal Rock EQ MENU Jazz Classic Pop User Delete Sleep Resume Scrolling speed Setting Contrast Backlight time backlight time OSD languages Default Version version IDLE time standby time
Trouble Shooting 1. The device fails to work or LCD does not display. 1) Check if there is enough battery power. 2) Check if the polarities of battery are correct. 2. The device does not respond to button press. 1) Check if the “hold” button is in “ON” position. 2) If it is in “OFF” position, button press does not work. 3. It can not play MP3 files. 1) Check if there is a MP3 file in the memory. 2) Check if the player is in music mode. 4. It can not play voice files.
Trouble Shooting 7. How to restore the default setting of the player. 1) Select “restore default setting” in the system setting of the device, and select “yes” to restore the default setting. 8. LCD backlight is not on. 1) Check if the backlight setting in the system setting of the device is set in “OFF” position.
Specification of Product 32 Dimensions (L x W x H) 85 x 26 x 22mm Net weight 34g (battery not included) Memory 128/ 256/512MB/1GB (depending on product version) Power supply One alkaline battery 1.
Technical Support Europe: For technical support in Europe e-mail drivesupport@verbatim-europe.com or call 00 800 3883 2222 in the following countries: Austria, Belgium, Denmark, Finland, France, Germany, Hungary, Italy, Luxembourg, Monaco, Netherlands, Norway, Poland, Portugal, Republic of Ireland, Spain, Sweden and Switzerland. All other countries call +353 61 226586 US/Canada: For technical support in the U.S. and Canada email techsupport@verbatim.com or call 800-538-8589.
Technical Support does not apply to normal wear or to damage resulting from abnormal use, misuse, abuse, neglect or accident or to any incompatibility or poor performance due to the specific computer software or hardware used. VERBATIM WILL NOT BE LIABLE FOR DATA LOSS OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, HOWEVER CAUSED, FOR BREACH OF WARRANTIES OR OTHERWISE. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or country to country.
