User manual

Installation

This section will walk you through the installation process. Placement of the device

is very important. Do not place the device in an enclosed area such as a closet or

cabinet.

Before You Begin

Please read and make sure you understand all the prerequisites for proper installa-

tion of your new device. Have all the necessary information and equipment on hand

before beginning the installation.

Note: Capacity depends on model. 1 MB = 1,000,000 bytes / 1 GB = 1,000,000,000 bytes /

1 TB = 1,000,000,000,000 bytes. Some capacity used for pre-loaded software, formatting

and other functions, and thus is not available for data storage. As a result, and due to

differing calculation methods, your operating systems may report as fewer megabytes/

gigabytes/ terabytes.

Default Settings

The default values for the PowerBay NAS array are as follows:

• User Name is ‘admin’ • LAN IP Address is 192.168.0.32

• Password is blank • LAN Subnet Mask is 255.255.255.0

Product

Overview

Installation

Web

Conﬁguration

Knowledge

Base