User manual

4
Product Overview
5
1
6
2
7
3
8
4
Hardware Overview
Front View
COMPONENT DESCRIPTION
1. Power Button • Press to power on.
• Press and hold for more than 5 seconds to power off.
2. Function Button USB One-Touch-Copy function is available when a USB storage device is connected to the
PowerBay NAS array.
• Press momentarily to initiate file copy from external USB storage device to the PowerBay NAS array.
• Press and hold for more than 3 seconds to safely dismount the external USB device.
Alarm Buzzer feature is available during alarm conditions.
• When alarm buzzer is sounding, press button to cancel alarm.
3. USB Connector • One USB 2.0 (Type A) connector: USB Host port for connecting an external USB storage device.
• Supports USB backup (copy files from attached USB drive to NAS array)
• Provides additional storage as a shared volume on the LAN (default name “USBDisk_1”)
• Supports USB Unlock Key for use with disk encryption
• Power: 5V/500mA max
4. Cartridge Key Lock • Turn key counterclockwise to the Lock position to lock all cartridges in place.
• Turn key clockwise to the Unlock position to unlock all cartridges.
5. Power LED The power button contains a colored LED to indicate power status.
• Solid Green = Device is Powered On
• Solid Red = Device is in Standby Mode with AC power applied
6. Status LED • Solid Green = Device operational status is Normal
• Blinking Green = Device is starting up or shutting down
• Solid Red = Device Error
7. Cartridge Lock • Slide locking button to the left to lock each cartridge.
• Slide locking button to the right to unlock each cartridge.
8. Cartridge LED Each HDD cartridge locking button contains a colored LED to indicate disk status:
• Solid Blue = Disk Ready
• Blinking Blue = Data Access Activity
• Blinking Red = Disk Error
• Solid Red = When all 4 cartridge LEDs are red indicates Locked Encrypted Volume
Product
Overview
Installation
Web
Configuration
Knowledge
Base