User manual

41
Web Configuration
E-Mail Settings - Page
On the E-Mail settings page, you can configure the PowerBay NAS array to automati-
cally prepare and send e-mails to alert you to certain operational conditions and drive
status conditions.
Login Method:
Select ‘Account’ if your
SMTP server requires
authentication. Select
‘anonymous’
if it does not.
User Name:
If ‘Account’ is selected,
enter the user name of
your e-mail account.
Password:
If ‘Account’ is selected,
enter the password for
your e-mail account.
SMTP Server:
Enter the SMTP Server address. This will be your outgoing mail server address.
If you are not sure what this is, contact the company that provides e-mail services
for you.
Port Number:
Enter the port number used by your SMTP Server.
Sender E-Mail:
Enter the Sender’s e-mail address. This is the address that the e-mail alerts will
appear to be coming from.
Receiver E-Mails:
Enter up to three Receiver e-mail addresses. These are the addresses you want the
e-mail alerts to be sent to.
Receiver e-mail 1 is assumed to be the Administrator and so this address is used for
certain other Administrator functions, such as encryption key notification.
Click ‘Save Settings’ when finished. Pressing the “Test E-Mail” button will cause an
e-mail message to be generated as a test.
Product
Overview
Installation
Web
Configuration
Knowledge
Base