Safety data sheet

Page 4 of 7
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
For non-emergency personnel: Keep unnecessary personnel away. For personal protection, see section
8 of the SDS.
For emergency responders: Keep unnecessary personnel away. Use personal protection recommended
in Section 8 of the SDS.
6.2. Environmental precautions: Avoid discharge into drains, water courses or onto the ground.
6.3. Methods and material for containment and cleaning up: Stop the flow of material, if this is without risk.
Following product recovery, flush area with water.
6.4. Reference to other sections: For personal protection, see section 8 of the SDS. For waste disposal, see
section 13 of the SDS.
SECTION 7: Handling and storage
Handling:
Handle in a well-ventilated area.
Install local exhaust at 3D printers area is recommended when many
printers are operated at once.
Keep away from fire (ignition source) and store at ambient
temperature.
Storage:
Protect from water, moisture and direct sunlight and store indoors at
ambient temperature and well-ventilated.
SECTION 8: Exposure Controls/Personal Protection
Protective equipment:
Respiratory protection: Wear appropriate protective equipment to avoid inhalation
or contact of gas generated from high temperature molten resin.
Hand protection: Wear the protective gloves.
It is preferable to wear cotton work gloves or leather gloves
when handling the melted resin.
Eye protection: Wear protective glasses when handling.
Skin and body protection: Wear clothing to avoid direct exposure of skin to molten resin,
when
handling.
SECTION 9: Physical and Chemical Properties
Appearance Physical state: Solid (Filament Shape)
Melting point/freezing point: 160 to 165 °C (start melting)
Auto ignition point (ignition point): 388 °C
Combustibility: If there are ignition source, it lights off.
Specific gravity (relative density): 1.20 to 1.28 g/cm
3
Solubility in water: Insoluble
Colour: White, Black, Blue, Green, Yellow, Orange, Red, Transparent,
Silver
SECTION 10: Stability and reactivity
Stability (possibility of hazardous reactions):
Largely stable under normal storing/handling conditions.
There is a biodegradability and unstable against heat, light &
humidity then gradually colours fade and decomposes.
Hydrolysis may occur.
When it decomposes, carbon hydride, aldehyde, other hazardous
gases can be generated.
Self-reactivity: none