Safety data sheet

ManualsBrandsVERBATIM Manuals3D PrintingFilament ABS plastic 1.75 mm Blue 1 kg

Material Safety Data Sheet

according to Regulation (EC) No. 1907/2006

Issued on December 2016

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

1.1 Product identifier

Trade name: ABS FILAMENT for 3D PRINTER

Registration number: -

Synonyms: None

55010

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG BLACK (n)

55011

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG WHITE (n)

55012

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG BLUE (n)

55013

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG RED (n)

55014

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG GREEN (n)

55015

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG TRANSPARENT (n)

55016

VERBATIM 3D PRINTER FILAMENT ABS 1.75MM 1KG SILVER/METAL GREY (n)

55018

VERBATIM 3D PRINTER FILAMENT ABS 2.85MM 1KG BLACK (n)

55017

VERBATIM 3D PRINTER FILAMENT ABS 2.85MM 1KG WHITE (n)

55019

VERBATIM 3D PRINTER FILAMENT ABS 2.85MM 1KG TRANSPARENT (n)

2. HAZARDS IDENTIFICATION GHS Classification:

2.1. Classification of the substance or mixture

The mixture has been assessed and/or tested for its physical, health and

environmental hazards and the following classification applies:

Classification according to Regulation (EC) No 1272/2008 as amended.

This substance does not meet the criteria for classification according to

Regulation (EC) 1272/2008 as amended.

1.2. Relevant identified uses:

3D Printer Filament for Material Extrusion

1.3. Supplier:

Verbatim GmbH

Address:

Duesseldorfer Strasse 13

D- 65760 Eschborn, Germany

Email:

SDS@verbatim-europe.com

Emergency Telephone

Number:

+49 (0) 6196 9001- 0

Summary of content (10 pages)

PAGE 1
Material Safety Data Sheet according to Regulation (EC) No. 1907/2006 Issued on December 2016 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 1.
PAGE 2
.2. Label elements Label according to Regulation (EC) No. 1272/2008 as amended 2.3. Hazard pictograms: Not applicable Signal word: Not applicable Hazard statements: The mixture does not meet the criteria for classification. Other hazards: None known Precautionary statements Safety measures: Do not breathe dust/fume/gas/mist Response: Get medical attention/advice if you feel unwell Storage: Keep away from fire.
PAGE 3
.2. General information for transparent ABS: Chemical substance/mixture: A mixture Chemical properties (chemical formula, etc): ABS-Methyl methacrylate Polymer No relevant Information Chemical name or generic name: Description CAS ID EINECS No. Content in % ABS-Methyl methacrylate Polymer Additive & Pigment 9003-56-9 (C3H3N, C4H6, C8H8) n More than Not disclosed Not disclosed Less than 2% 3.2.1. Health hazards elements for transparent ABS:  4.
PAGE 4
5. FIRE-FIGHTING MEASURES General fire hazards: 5.1 No unusual fire or explosion hazards noted. Extinguishing media: Suitable extinguishing media: Water fog. Foam, dry chemical powder, Carbon dioxide (CO2) Unsuitable extinguishing media: Do not use water jet as an extinguisher, as this will spread the fire. 5.2 Special hazards arising from the substance or mixture: During fire, hazardous gases may be formed 5.
PAGE 5
8. EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control parameters: Occupational exposure limits: No exposure limits noted for ingredient(s) Biological limit values: No biological exposure limits noted for the ingredient(s) Recommended monitoring procedures: Follow the standard monitoring procedures Derived no-effect level (DNEL): Not available 8.2. 9.
PAGE 6
10. 11. STABILITY AND REACTIVITY 10.1. Reactivity: The product is stable and non-reactive under normal conditions of use, storage and transport. 10.2. Chemical stability: Material is stable under normal conditions. 10.3. Possibility of hazardous reactions: No dangerous reaction known under conditions of normal use. 10.4. Conditions to avoid: Exposing to direct ignition sources. 10.5. Incompatible materials: No data available. 10.6.
PAGE 7
12. ECOLOGICAL INFORMATION 12.1. Toxicity: Due to partial or complete lack of data the classification for hazardous to the aquatic environment, is not possible 12.2 Persistence and degradability: No data is available on the degradability of this product 12.3 Bioaccumulative potential: No data available Partition coefficient n-octanol/water (log Kow): Not available Bioconcentration factor (BCF): Not available Mobility in soil: No data available 12.4 12.5.
PAGE 8
15. REGULATORY INFORMATION 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture EU regulations Regulation (EC) No. 1005/2009 on substances that deplete the ozone layer, Annex I and II, as amended: Not listed Regulation (EC) No. 850/2004 On persistent organic pollutants, Annex I as amended: Not listed Regulation (EU) No. 649/2012 concerning the export and import of dangerous chemicals, Annex I, Part 1 as amended: Not listed Regulation (EU) No.
PAGE 9
Other regulations: The product is classified and labelled in accordance with EC directives or respective national laws. This Safety Data Sheet complies with the requirements of Regulation (EC) No 1907/2006, as amended. National regulations: Follow national regulation for work with chemical agents. 15.2. Chemical safety assessment: No Chemical Safety Assessment has been carried out 16.
PAGE 10