Installation Guide

ManualsBrandsVeranda ManualsKitchenVinyl Fence Gate Hinge Kit (Common: 5-1/2 in. x 7 in. x 9 in.; Actual: 5.500 in. x 6.9 in. x 8.9 in.)

Owner's Manual

Version

1.0

Hinge Kit

Assembly and Installation Instructions

PLEASE READ OWNER'S MANUAL COMPLETELY

BEFORE ASSEMBLING YOUR GATE FRAME.

34106811BOM V1 1/13

To register your product, please visit: www.barretteoutdoorliving.com/product-registration

For use with Build-It-Yourself Framed Gates

& Pre-Built Vinyl Panels and Wood Gates.

Supports Gates up to 150lbs. and 6'x6

⁄

⁄2⁄

Style A

Style B

Style C

For Build-It-Yourself panels,

purchase a framed gate

For certain Build-It-Yourself panels,

purchase a panel with the gate

framing kit (select styles only)

Panel + Kit

For Pre-Built panels, purchase a

hinge kit and a panel to create a

custom gate

Summary of content (6 pages)

PAGE 1
34106811BOM V1 1/13 Hinge Kit Assembly and Installation Instructions PLEASE READ OWNER'S MANUAL COMPLETELY BEFORE ASSEMBLING YOUR GATE FRAME. For use with Build-It-Yourself Framed Gates & Pre-Built Vinyl Panels and Wood Gates. Owner's Manual Version 1.0 Supports Gates up to 150lbs. and 6'x61⁄2'.
PAGE 2
Thank you for choosing the Barrette Outdoor Living Hinge Kit. Please read the instructions completely before assembling your hinge kit. Retain manual and your dated sales slip for future reference and warranty claims. Before You Begin… Check your local zoning laws. • Local zoning laws and Home Owners Associations may regulate the location, style and height of your fence or even require a permit signoff beforehand. Contact your local utilities companies.
PAGE 3
Installation 1.) Determine gate size and hardware clearance is approximately 3". The hinge kit will support gates up to 150 pounds and 6'x61⁄2'. X + 3" a.) Build-It-Yourself Gates are available in predetermined widths (Style A). b.) For select styles, a custom size gate can be assembled from a Build-It-Yourself panel and the purchase of the Gate Framing Kit (Style B). c.) Pre-Built panels (Style C) can be altered to make custom gate sizes.
PAGE 4
3.) Install back plate on the opposite side of the hinge and secure with appropriate bolt size and fastener. The included nylon spacer may be required to fill in void space. Repeat steps to install second hinge on bottom rail. See chart below for detailed fastening options. Upright/Rail Gate Width Bolt Size Fastener 1.5" 60mm Locking Nut With Spacer 1.75" 60mm Acorn Nut With Spacer 2" 60mm Acorn Nut 2.5" 60mm Purchase 8, M6 75mm with Supplied Acorn Nut 4" 110mm Acorn Nut Back Plate 4.
PAGE 5
7.) Once gate is aligned and adjusted correctly, snap on decorative hinge covers. For pre-built panels (Style C), rail caps can be inserted to cover exposed rail ends on the end of the gate. Adhere with supplied glue. 8.) Measure and install latch with six 11⁄2" Phillips screws. The latch striker is installed on the gate first and then install the latch catch onto the gate post. 9.) Install the handle in desired location using the four 1" supplied screws.
PAGE 6
One Year Warranty What is covered: Barrette Outdoor Living warrants vinyl and aluminum products to include; vinyl and aluminum fence, vinyl and aluminum railing and plastic lattice against defects or workmanship for as long as you own your home. Barrette Outdoor Living will at its option replace the product in question with new product of the same or equivalent value at no charge.