Installation Guide

Permanently attach rails to brackets

on the uprights:

a. Add the assembled rail section from Step 2 to the

brackets on the uprights (Fig. 7).

b. Making sure the uprights are  ush to the rails, pre-

drill with a

⁄

⁄32⁄

" drill bit through the bracket holes

under rails

(3 per bracket). Do for both top and bottom

rails (Fig. 7).

c. Attach brackets to the rails, using 1" screws

(provided in rail kit) (3 per bracket).

d. Optional "gaskets" are included in each rail bracket

kit and can be installed if desired (Fig. 8).

Mount hinges to gate:

a. Center the provided hinges on the upright to align

with the top and bottom rails of gate and mark screw

holes.

b. Pre-drill holes through aluminum insert (Fig. 9).

c. Screw in with two screws (provided with hinge)

Fig. 7

Fig. 8

Fig. 9

Gasket