Installation Guide

Owner's Manual

Version

1.0

Vinyl Fence

Professional Rail Notcher

PLEASE READ OWNER'S MANUAL COMPLETELY

BEFORE USE

RAILNOTCHER_WEB V1 3/13

To register your product, please visit: www.barretteoutdoorliving.com/product-registration

The Vinyl Fence Rail Notcher makes raised tabs in the end section of vinyl rails. The louver-shaped tabs

create a durable "lock" that prevents the rail from pulling out of the post. The 6x8 Professional Grade

Fence Panel comes with the ends of the rails already notched. However, if you need to cut down the fence

section to make it shorter you will need to put new tabs in the rails to lock it into the post. You can create

the lock tabs while the panel is pre-assembled; you do not need to take the rails off the panel.

Below is how you use the notcher.

Place the notcher with the striker plate inside the rail.

The rail should be inserted all the way into the

notcher.

Squeeze the handle ﬁ rmly and with even pressure

to create tab.

Repeat this process so you have three lock tabs per

rail side (total of 6 on each rail). Your cut-down

panel is now ready to be installed into your posts.

Striker Plate

Top View of Rail

3 Notches Per Rail Side

PAGE 1
RAILNOTCHER_WEB V1 3/13 Vinyl Fence Professional Rail Notcher PLEASE READ OWNER'S MANUAL COMPLETELY BEFORE USE Owner's Manual Version 1.0 To register your product, please visit: www.barretteoutdoorliving.com/product-registration The Vinyl Fence Rail Notcher makes raised tabs in the end section of vinyl rails. The louver-shaped tabs create a durable "lock" that prevents the rail from pulling out of the post. The 6x8 Professional Grade Fence Panel comes with the ends of the rails already notched.
PAGE 2
Transferable Limited Lifetime Warranty What is covered: Barrette Outdoor Living warrants vinyl and aluminum products to include; vinyl and aluminum fence, vinyl and aluminum railing and plastic lattice against defects or workmanship for as long as you own your home. Barrette Outdoor Living will at its option replace the product in question with new product of the same or equivalent value at no charge.