Data Sheet

ManualsBrandsVeracity ManualsEthernet ExtendersOUTREACH Max Ethernet and PoE Extender

www.veracityglobal.com

If only Ethernet

extension is required,

use OUTREACH Lite

OUTREACH Lite extends Ethernet only

and does not forward POE.

Diagram 2. Veracity’s OUTSOURCE Plus provides enough power to allow 300

metres (984 ft) of extension to a POE Plus wireless access point, using two

OUTREACH Max units located at 100 metre intervals.

IP DEVICE

POWER

PLUS

NETWORK DATA ONLY

POE NETWORK

SWITCH

VOR-OSP

POE

ETHERNET WITH POE ETHERNET DATA ONLY

NETWORK DATA

100M100M

VOR-ORM

100M

VOR-ORM

Maximum Extension Distance

By installing an OUTREACH Max for every extra 100 metres of cable, POE and Ethernet can be extended for considerable

distances with no loss of network bandwidth.The limit depends on which POE Source is used and on how much power the IP

camera or other device requires:

These are strict limits for installations

using regular 24AWG Cat 5e cable.

Distance is limited by the peak power

required by the device; its POE “power

class” is not used. Use of OUTSOURCE

or OUTSOURCE Plus injectors is

recommended for extension beyond

300 metres.

For example, installing a 5 watt IP camera

500 metres (1640 ft) from its power

source would require four OUTREACH

Max units and an OUTSOURCE injector.

The table shows that OUTSOURCE can

deliver 6 watts at 700 metres, so this

is safely within the maximum range that

is permitted.

“No POE” distances are for Ethernet

extension only, and the last device in the

chain must be an OUTREACH Lite.See

the OUTREACH Lite datasheet for details,

or consult Veracity’s application notes for