Owner's manual

WALL MOUNT CLIPS

• To mount the unit securely to a at surface, t the enclosed clips as shown and refer to the mounting template below.

1U RACK BRACKET (Option)

• Use with rack PSU options

DIMENSIONS | MOUNTING HOLE TEMPLATE

• Width 110mm (131mm inc. clips) | Depth 70mm (80mm inc. connectors) | Height 40mm | Weight 225g

Scale 1:1

DIN RAIL CLIP (Option)

• Remove upper two screws and t as shown.

57V

POE POWER AVAILABILITY

• CAMSWITCH 8 Plus can deliver up to full 802.3at POE Plus

power on all 8 ports when used with the rack PSU system.

For other installations, the total budget is limited by the power

supply connected.

• The power budget is the total power used by POE devices.

This information may be found in the IP camera or POE device

datasheets. POE power classes are ignored.

• For example, the VPSU-57V-1500 provides a 78W budget.

This is enough for two full-power 802.3at (25.5 watt) cameras

plus two full power 802.3af (13 watt) cameras, or eight

cameras of up to 9 watts each.

INPUT SOURCE BUDGET

DC front

VPSU - 57V - 800 40 watts

VPSU - 57V - 1500 78 watts

DC rear Veracity rack PSU 204 watts

POE

POE switch 10 watts

VOR - OSP 25 watts

1. Insert

2. Click

• To check the power budget for your supply, refer to the table

below. Only Veracity 57V power supplies may be connected

to DC inputs.

122mm

25mm