User's Manual

User Manual for Product Model: NB24G20V0 Page 5 of 7
PUBLIC
5 Sensor Generic Specifications
Sensor Specifications & Functions
Value
Unit
Operating Conditions
Frequency Band
24.050 – 24.250 (ISM)
GHz
Vehicle Network Interface
CAN 2.0B
-
Operating Temperature
-40C to +85
C (External Ambient)
Input Operating Voltage
8.0-16.0
VDC
RF Output Power (EIRP)
13.26
dBm
Operating Life
15
yrs.
Waveform Parameters
Cycle Time
81.62
ms
Bandwidth
<200
MHz
Physical Parameters
Size
72 x 63 x 16
mm (excluding connector)
Weight
<75
g
Vehicle Physical Interface
Standard is 6 Pin DUAL
CAN
-
Table 1: Sensor Specifications
6 Sensor Features
The BSD algorithm detects and reports “Objects of Interest" on either side of the vehicle, within a
specified “blind spot” zone. The feature generates a signal which is used to drive a visual display placed
in the outside view mirror to alert the driver to the presence of objects of interest within the defined
SBZA zone.
The LCA algorithm detects and reports to the driver that a vehicle is rapidly approaching the host
vehicle in one of the adjacent lanes. The feature generates a signal which is used to drive a visual
display placed in the outside view mirror and/or request a chime or vibrating seat cushion, to alert the
driver to the approach of objects of interest within the defined LCA zone.
The RCTA algorithm detects and reports “Objects of Interest” behind the host vehicle, within a specified
RCTA coverage zone. The feature generates a signal which is used to drive a visual display to alert the
driver of the presence of objects of interest that may cause a collision with the host vehicle within the
defined RCTA zone.