User manual

Opening and Saving Calibration Files
The Configuration Step 2 dialog box enables file management operations.
Save
The Save icon saves the calibration. The extension of the files is .CAL.
Open
The Open icon will allow you to load backup calibration files. When the
OK icon is clicked, the system is calibrated.
You can configure immediately in the Step 2 dialog box and open the
calibrated file.
OpenCIM Device Driver
The ViewFlex Device Driver interfaces between the OpenCIM network
and the Vision Machine System as a quality control device.
ViewFlex Device Driver
Each quality control test is defined as a separate process in the Machine
Definition module. The quality control test consists of three parts:
 File: The File is the Script File (.bas) that contains the Program
(Function) to be executed.
 Program: The Program is the Function from the File that returns the
results of the quality control process to the OpenCIM Manager as
Pass/Fail or Error.
 Fail %: Simulates test results (only in Simulation Mode) by
determining the Pass/Fail according to the percentage of failure that
was input.
ViewFlex v.3.3 2-33 User Manual
1209