User manual

Image Format
The Video Format Properties dialog box is displayed by pressing the
button, as shown below.
Video Format Properties Dialog Box
The Format Properties dialog box enables you to define your video format
setting, such as frame rate, color space, output size and more.
ServeCam Camera Connection (Client Camera only)
Connect to
If there is more than one ServeCam on the network, then you can make a
connection to the specific ServeCam that you want by entering the IP
address of that ServeCam’s computer.
The default IP address is the one that initially appears in the box, which
was automatically detected.
Clicking OK will connect to the ServeCam at the IP address shown.
To configure a second local camera in place of a ServeCam Camera, refer
to ViewFlex.ini File Configuration (for advanced users) on page 1-13.
ViewFlex v.3.3 2-12 User Manual
1209