User manual

Veo Configuration
The Video Source Properties dialog box is displayed by pressing the
button, as shown below.
The Video Source Properties window contains the following configuration
tabs:
 Video Proc Amp Tab describes how to define your device settings.
 Image Tab, describes how to define your image options, such as
flickering reduction, exposure control, picture quality and more.
Note: These tabs contain the default settings of the camera. For additional
information on the camera configuration, refer to the Veo (Velocity
Connect) User's Guide.
Tabs description
Video Proc Amp Tab
The Video Proc Amp tab enables you to define your device settings, by
dragging the relevant sliders such as Brightness, Contrast, Hue Saturation
and more. You can define your default settings as required and then press
Default.
ViewFlex v.3.3 2-10 User Manual
1209