User manual

VIPN1100 Veo Europe IP Netcam Manual rev 1.2 EN - 4
-
Introduction
Observer IP NetCam is a color camera with built-in IP address, Ethernet software stacks and
protocols. Plug Observer IP NetCam directly to a RJ45 Ethernet port and watch the camera
site from anywhere around the world. Connecting directly to Ethernet networks, the Observer
IP NetCam is a standalone digital network camera requiring no extra server at the camera site.
With the motion detection trigger function, Observer IP NetCam will provide you with the
necessary security with the easiest installation.
Plug the Observer IP NetCam into your network and you're ready to see what's happening
even when you're not there! Accessing the camera is as simple as surfing the web, just point
your browser to the camera's onboard home page. You'll find everything you need to view,
and do video recording from the camera from anywhere on your network or even over the
Internet!
The Observer IP NetCam is accessed with the IP address directly and the images are viewed
by standard Web browsers.
1. System Features
1-1. Package Contents
1. Observer IP NetCam (VIPN1100)
2. Power Adapter
3. Red Color 10/100 Mbps Ethernet LAN Cable (MDI / X, Cross over LAN cable)
4. Blue Color 10/100 Mbps Ethernet LAN Cable (MDI)
5. Observer IP NetCam installation CD-ROM
6. User’s Manual
1-2. System Requirements
To view the camera web page
 Web Browser – Internet Explorer for Windows 5.0 or higher
 PC with Windows 98, Me, 2000, or XP connected to LAN
To run the included software (IPEDIT) applications
 PC - Intel Pentium II or equivalent, 300MHz or above, 64MB RAM, 150 MB Hard Disk
Space, 800x600 resolution with 16- bit color
 Windows 98, Me, 2000, or XP
To access cameras from the Internet
 Broadband Internet Connection (DSL, Cable Modem) with min. 128k upload speed