User guide

10 Place the tubing connector onto the reservoir. Turn the connector clockwise, pressing gently against the
reservoir until you feel it slide in. Push in and continue turning until the reservoir and the connector lock
with a click.
7
8
9
10
11 Tap the side of the reservoir to remove any air bubbles.
12 To purge air bubbles that have risen to the top of the reservoir, push up on the plunger until you see
insulin in the tubing.
13 Without pulling, turn the plunger counter-clockwise to remove it from the reservoir.
11 12
13
14 Use your reservoir immediately after you fill it. Do not store it filled.
Starting on insulin 63
Chapter 5