User guide

When suspended, your pump is in Attention mode with a solid circle showing on the pump. When in
Suspend, you can only resume your basal or view the STATUS screen. If the Sensor feature is turned on, you
can also view the sensor graphs and the SENSOR STATUS screen. No other functions are available.
To suspend the pump:
1 Select Suspend from the MAIN MENU, and press ACT.
Main > Suspend
2 SUSPEND will flash on your screen. Press ACT to stop your pump.
3 The screen will show that the pump is suspended and the time that it stopped. After less than one minute,
the pump will return to the HOME screen with a solid circle.
You can verify on your pump STATUS screen that your pump is
suspended.
Resume pump delivery
When the pump is suspended, it defaults to the HOME screen with a solid circle.
To resume your pump and basal delivery, do these steps:
1 From any screen, press ACT until the RESUME screen appears. Press
ACT again.
2 Your pump will beep once, then the HOME screen will appear without the solid circle.
Basic programming 59
Chapter 4